CRT:KD-34XS955
Information | ||
---|---|---|
Manufacturer | Sony | |
Type | Consumer | |
Tube Series | FD Trinitron | |
Size | 34" | |
Regions | NTSC | |
240p/480i | Yes | |
480p | Yes | |
720p | Yes | |
1080i | Yes | |
Vsync | 60Hz | |
Widescreen | Yes | |
RF | 2x | |
Composite | 1x Front / 3x Rear | |
S-Video | 1x Front / 2x Rear | |
Component | 2x YPbPr | |
SDI | No | |
HD-SDI | No | |
HDMI | 1x HDMI 1.0 | |
Dimensions | Width: 994mm (39-1/8")
Depth: 654mm (25-3/4") Height: 604mm (23-3/4") | |
Weight | 93kg (205lbs) | |
Links | ||
Chassis | DA-4 | |
Remote | RM-Y199 | |
Operation Manual | KD-34XS955 Operating Instructions | |
Service Manual | KD-34XS955 Service Manual (Original Version) KD-34XS955 Service Manual (Revised Version) |
34-inch widescreen HD CRT released by Sony in 2004. This model contains Sony's SFP (Super Fine Pitch) Trinitron tube, which delivers greatly improved picture detail. It also has a digital ATSC tuner for receiving modern television broadcasts.
By default, this TV introduces input lag at all input resolutions. However, for early model units only, by setting "HDPT" to 0 in the service menu, 1080i and 540p signals are internally switched to bypass the digital scaling circuitry. This results in zero input lag for 1080i and 540p signals only.
The standard version of this TV features an anti-glare sheet on the tube. This can be removed if it is scratched/damaged. There is also another version of this TV, model KD-34XS955N, which did not come with the anti-glare sheet from the factory.
Chassis Revision
Halfway through 2005, Sony made a major revision to the DA-4 chassis used by this TV. This revision removed numerous ICs, and changed to an entirely new digital video processing board, with a newly designed "one-chip" DRC/MID IC. This new digital board also eliminated the circuitry responsible for enabling HDPT. Therefore, only the early model XS955 and HS420 units are able to display lag-free 1080i and 540p signals.
Sony issued a new service manual for these revised models, and included the serial number range for the units which use the revised DA-4 chassis. The serial number ranges for the original and revised versions of this model are as follows:
Revision | Serial Number Range |
---|---|
Original version (HDPT capable) | 9,000,001 - 9,500,000 and 8,000,001 - 8,500,000 |
Revised version (NOT HDPT capable) | 4,500,001 to 4,999,999 and 9,500,001 and up |
Some KD-34XS955 and KD-34XS955N units have serial numbers in the 4,000,000 to 4,500,000 range, which do not fit into either of the ranges listed on the service manuals. However, these units were all built after 5/2005, so they should have the revised chassis (NOT HDPT capable).